Seamless Feed-Thru Punches

Feed-Thru Punches, also called "Clicker Punches" are often used to cut leather products, gaskets, rubber, foam and similar materials. Feed-Thru Punches are machined with additional internal clearance behind the cutting edge to facilitate the ejection of cut disks through the back of the punch.

Standard Heights: 3/4", .937", 1", 1 1/8", 1 1/4", 1 1/2" and 2"
All listed cutting sizes are available in all standard heights with no setup charge.

Cutting Sizes

Cutting sizes from 1/16" (0.0625") – 1" (1.0")

Fraction	Decimal	Base Size
1/16	.0625	3/16
3/32	.094	3/16
1/8	.125	1/4
5/32	.156	1/4
3/16	.1875	5/16
7/32	.219	5/16
1/4	.250	3/8
9/32	.281	3/8
5/16	.3125	7/16
11/32	.344	7/16
3/8	.375	1/2
13/32	.406	1/2
7/16	.4375	9/16
15/32	.469	9/16
1/2	.500	5/8
17/32	.531	5/8
9/16	.5625	11/16
19/32	.594	11/16
5/8	.625	3/4
21/32	.656	3/4
11/16	.6875	13/16
23/32	.719	13/16
3/4	.750	7/8
25/32	.781	7/8
13/16	.8125	15/16
27/32	.844	15/16
7/8	.875	1"
29/32	.906	1"
15/16	.9375	1 1/16
31/32	.969	1 1/16
1"	1.000	1 1/8

Cutting sizes from 1 1/16" (1.0625") – 2" (2.0")

Fraction	Decimal	Base Size
1 1/16	1.0625	1 3/16
1 3/32	1.094	1 3/16
1 1/8	1.125	1 1/4
1 5/32	1.156	1 1/4
1 3/16	1.1875	1 5/16
1 7/32	1.219	1 5/16
1 1/4	1.250	1 3/8
1 9/32	1.281	1 3/8
1 5/16	1.3125	1 7/16
1 11/32	1.344	1 7/16
1 3/8	1.375	1 1/2
1 13/32	1.406	1 1/2
1 7/16	1.4375	1 9/16
1 15/32	1.469	1 9/16
1 1/2	1.500	1 5/8
1 17/32	1.531	1 5/8
1 9/16	1.5625	1 11/16
1 19/32	1.594	1 11/16
1 5/8	1.625	1 3/4
1 21/32	1.656	1 3/4
1 11/16	1.6875	1 13/16
1 23/32	1.719	1 13/16
1 3/4	1.750	1 7/8
1 25/32	1.781	1 7/8
1 13/16	1.8125	1 15/16
1 27/32	1.844	1 15/16
1 7/8	1.875	2"
1 29/32	1.906	2"
1 15/16	1.9375	2 1/16
1 31/32	1.969	2 1/16
2"	2.000	2 1/8

Larger cutting sizes

Don't see what you need, we'll make it for you! Contact Us